Haridarshan Instru-Lab
Haridarshan Instru-Lab
Ahmedabad, Gujarat
SEND SMS
SEND EMAIL

Cement Testing Equipment

Our product range includes a wide range of stainless steel cement autoclave, compression testing machine, planetary mixer mortar mixer, cube & cylindrical mould, beam mould and vibrating machine.

Stainless Steel Cement Autoclave

Stainless Steel Cement Autoclave
  • Stainless Steel Cement Autoclave
Get Best Quote
Approx. Price: Rs 27,000 / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
Temperature Range215 Degree C
Pressure Range (psi)298 psi
MaterialStainless Steel
Insulation WallDouble Wall
ShapeHorizontal, Vertical
Power Consumption (KW)3 KW
Warranty1 Year
AccessoriesSilicon rubber Gasket, Spanner
InstallationYes
Rating3000 W
Voltage230 V

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime

This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.

Silent Features:
  • Rust proof stainless steel pressure vessel
  • Specially designed Steam Safety Valve, pressure control switch and Temp. control switch - Triple Safety precautions for operator safety
  • Accurately Calibrated Pressure Gauge
  • Guaranteed timings and performance as per IS 4031
Specifications:

 Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.

Inside chamber dimensions10.5 cm dia x 40.5cm height.

Least Count04 kg/cm2


Power supplySingle Phase 15 Amp


Standard Accessories: 
  • Special rack to hold specimens above water level in the autoclave and in vertical position
  • Pressure gauge with calibration report with national traceability
Accessories At Extra Cost:
  • Length comparator with dial micrometer 0.002mm X 5mm
  • shrinkage bar moulds(single/two/triple gang)
  • PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging
  • PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging
  • Spare heater set
  • Spare Silicon Gasket
  • Spare Pressure gauge
  • Spare safety valve
Request
Callback
Yes! I am interested

Compression Testing Machine

Compression Testing Machine
  • Compression Testing Machine
Get Best Quote
Approx. Price: Rs 99,000 / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
Driven TypeElectric
Operating ModeAutomatic
MaterialCI, MI

To retain our goodwill in clients' consideration, we trade and supply a quality approved Compression Testing Machine. Suitable for compression tests on concrete specimens, offered machine is precisely manufactured using the latest technology and supreme quality components at vendors end. The provided machine is highly acknowledged by the clients. Our valuable clients can avail this machine in different technical specifications and sizes.

Features:

  • Optimum functionality
  • Electric cum hand operated
  • Excellent results
Request
Callback
Yes! I am interested

Planetary Mixer Mortar Mixer

Planetary Mixer Mortar Mixer
  • Planetary Mixer Mortar Mixer
Get Best Quote
Approx. Price: Rs 36,000 / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
MaterialSS, MS
Driven TypeElectric
Voltage230 V

With the continues support of our adept and seasoned professionals, we are devoted towards offering a commendable range of Planatery Mixer-Morta Mixer. Our provided mixer is used for the purpose of mixing cement pastes and mortars; this is procured from certified vendors’ of the market. Moreover, this mixer is available in the market in various sizes and specifications at pocket friendly prices.

Features:

  • LCD screen for a simple navigation
  • Quick program of automatic mixing cycle
  • Perfect mixing of the components

Specifications:


  • The apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 5 r.p.m. and 285 10 r.p.m. with planetary motions of approximately 62 r.p.m. 5 r.p.m. and 125 r.p.m. /-10 r.p.m. respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six liters capacity. Suitable for operation on 230 volts, 50 cycles, single phase, A.C.supply.
Request
Callback
Yes! I am interested

Cube & Cylindrical Mould

Cube & Cylindrical Mould
  • Cube & Cylindrical Mould
Get Best Quote
Approx. Price: Rs 600 / NumberGet Latest Price

Product Details:

Minimum Order Quantity6 Number
MaterialCI, MS
Operating ModeManual
ApplicationConstruction

Owing to the expertise of our skilled professionals, we have been able to provide a qualitative range of Cube & Cylindrical Mould. Used to cast cylindrical cement concrete specimens for compressive strength tests, offered mould is highly appreciated in the market due to its various features. Available in different dimensions, our offered mould is precisely manufactured at vendors’ end using quality tested raw material and ultra-modern technology. In addition to this, our prestigious clients can avail this mould at nominal prices.

Features:

  • Sturdy structure
  • High strength
  • Dimensional accuracy

Specifications:

  • These are available in different sizes and are made according to Indian and British standards. For the metric size cube moulds, the faces are machined flat to 0.02 mm accuracy and finished to within 0.02 mm. For the inch size moulds, the faces are machined flat to 0.01 inches and finished to within 0.01 in. All moulds are supplied complete with base plate.

Other Details:

  • Mould Cast iron, for 50 mm, Cube
  • Mould gunmetal, for 50 mm, Cube
  • Mould steel for 7.06 cms cube with loose base plate
  • Mould Cast iron for 7.06 cms cube with loose base plate
  • Mould Cast iron, for 10 cm cube 153 with "ISI" mark
  • Mould Cast iron, for 15 cm cube 155 with "ISI" mark
  • Mould Cast iron, for 20 cm cube
  • Mould Cast iron, for 30 cm cube
    Request
    Callback
    Yes! I am interested

    Beam Mould

    Beam Mould
    • Beam Mould
    Get Best Quote
    Approx. Price: Rs 3,200 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    ApplicationConstruction, Industry
    MaterialCI, MI
    FeatureHeat Resistance

    We are the renowned entity involved in offering quality approved range of Beam Mould. In line with industry quality standards, offered mould is manufactured by our vendors’ experts using premium quality raw material and ultra-modern technology that is used in construction industry. In order to maintain the quality, this mould is strictly checked on varied quality measures. Furthermore, this mould is available in different specifications.

    Features:

    • Heat resistance
    • Smooth functioning
    • Easy maintenance
    Request
    Callback
    Yes! I am interested

    Vibrating Machine

    Vibrating  Machine
    • Vibrating  Machine
    Get Best Quote
    Approx. Price: Rs 18,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Power2-4 kw
    MaterialMI, CI
    Operating ModeAutomatic

    Also called Mould Vibrator Or Mortar Cube Vibrator.

    Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air tapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a vibrating machine. Vibration machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat portland cement, portland bleast furnace cement and high alumina cements.

    Specifications:

    The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06 cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an intergral bottom part of the frame. The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25 mm mould. The frequency of vibration is 12000 400 vibration per minute. Supplied complete with on 7.06 cm cube mould with loose base plate, a time switch 0-5 mins x 1 min and certificate of vibration from a standard laboratory.

    Spares:

    • Set of Springs, Belt and Belt guard.
    Request
    Callback
    Yes! I am interested

    Vibrating Table

    Vibrating Table
    • Vibrating Table
    Get Best Quote
    Approx. Price: Rs 25,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialMS, SS
    Operating ModeAutomatic
    Driven TypeElectric

    The Vibrating Table is used for compacting concrete cubes and cylinders. Specifications: It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50 cm x 50 cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied step lessly between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply. Vibrating Tables of table top size 75 cm x 75 cm as well as 100 cm x 100 cm are also available.
    Request
    Callback
    Yes! I am interested

    Slump Cone Apparatus

    Slump Cone Apparatus
    • Slump Cone Apparatus
    Get Best Quote
    Approx. Price: Rs 1,200 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MS
    Operating ModeManual
    Height of Cone30 cm

    It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm.

    Specifications:

    • The Apparatus consists of one slump cone with handles and foot pieces
    • The slump cone has internal dimensions 20 cm. dia at base 10 cm. top dia. and 30 cm height
    • Foot pieces can be fixed to the clamps on the base plate. The base plate has lifting handle for easy transportation
    • One graduated steel rod 16 mm dia x 600 mm long, rounded at one end and graduated in mm, is also supplied
    Request
    Callback
    Yes! I am interested

    Vicat Needle Apparatus

    Vicat Needle Apparatus
    • Vicat Needle Apparatus
    Get Best Quote
    Approx. Price: Rs 1,900 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, SS
    ApplicationConstruction
    Base Plate MaterialGlass

    This Vicat Needle Apparatus is used for determining the normal consistency and setting times of cement and 'A' Class limes.

    Specifications:

    • The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger
    Request
    Callback
    Yes! I am interested

    Soundness Test Apparatus

    Soundness Test Apparatus
    • Soundness Test Apparatus
    Get Best Quote
    Approx. Price: Rs 1,900 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    ApplicationIndustrial, Laboratory
    MaterialBorosil glass
    Flask height243 mm

    Used for finding specific gravity of Hydraulic Cement. Made from Borosil glass. The flask is 243 mm in total height, having a bulb of 90 mm dia of 250 ml approximate capacity. The long neck of the flask has at top a funnel of 50 mm dia in which fits a ground glass stopper. The neck has over-all 11 mm I.D. upper portion is graduated from 18 ml to 24 ml with 0.1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.

    Request
    Callback
    Yes! I am interested

    Flow Table

    Flow Table
    • Flow Table
    Get Best Quote
    Approx. Price: Rs 7,500 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MI
    Table Diameter30 cm
    ApplicationConstruction, Industry

    This is used for determining the workability of building limes.

    Specifications:

    • The flow table consists of a 30 cm. dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19 cm. dia
    • The table top is arranged for a free fall of 12.5 mm by a cam action
    • Supplied complete with one brass conical mould, 65 mm I.D. at base and 40 mm I.D. at top, height of the mould 90 mm
    Request
    Callback
    Yes! I am interested

    Air Entrainment Meter

    Air Entrainment Meter
    • Air Entrainment Meter
    Get Best Quote
    Approx. Price: Rs 25,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    ApplicationIndustrial, Construction
    MaterialMS, SS
    Operating ModeManual

    As Entertainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additives to increase workability of concrete requires an air content check to be made. Air Entertainment meters are used to determine air entertained in freshly mixed concrete by pressure method.

    Specifications:

    The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38 mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories. Calibration cylinder with spring clamp, Trowel, Tamping rod, Straight edge, Rubber mallet and measure.
    Request
    Callback
    Yes! I am interested

    Ball Mill

    Ball Mill
    • Ball Mill
    Get Best Quote
    Approx. Price: Rs 63,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MI
    Driven TypeElectric
    Operating ModeAutomatic

    Consist of a drum made of welded steel having an inside diameter of 300mm x 300mm long. Supported on heavy duty bearings. A reduction gear driven by a motor rotates the ball mill at 28-30 PM. Supplied complete with 12-19mm dia steel balls and revolution Counter.
    Request
    Callback
    Yes! I am interested

    Blain Air Permeability Apparatus

    Blain Air Permeability Apparatus
    • Blain Air Permeability Apparatus
    Get Best Quote
    Approx. Price: Rs 2,200 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialSS
    Rubber tube20 cm

    To determine the fineness of cements, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air permeability methods are used to determine the specific surface as total surface area in cm²/g of material.

    Air Permeability Apparatus Blaine Type IS: 5516 IS: 1727, IS: 4031, IS: 4825, ASTM C204, BS: 4359 Part 2, It is a variable flow type air permeability apparatus. The apparatus comprises one each of:

    • Permeability Cell, 12.5 mm ID
    • ‘U’ Tube Manometer, mounted on stand
    • Perforated Metal Disc
    • Plunger
    • Rubber Stopper
    • Rubber TUbe 20cm long.
    • Rubber TUbe 20cm long
    • Filter Paper Disc
    • Dibutylphthalate Liquid
    Request
    Callback
    Yes! I am interested

    Flow Table

    Flow Table
    • Flow Table
    Get Best Quote
    Approx. Price: Rs 7,500 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Driven TypeElectric
    Operating ModeAutomatic/ Manual
    MaterialBrass, MI

    The consistency and workability of concrete is a very important factor and is strictly connected to the water/cement ratio, to the effect of admixtures and finally to the strength and quality of concrete. Suitable for concrete mixes of high and very high workability. To perform this test, a sample is placed on a metal surface which is then raised and dropped through a known height.

    General Description And Specification As per IS : 5512 for cement Mortar and Lime

    The flow table consists of a brass table top 250 + 2.5mm dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to drop through 12mm by a ground and hardened cam, Complete with mould 100mm base dia, 70mm top dia and 50mm high. The cam shaft is rotated at the rate of 100 RPM by an electric motor. Suitable for operation on 230 Volts 50 cycles. Single Phase, A.C. Supply. Manually operated flow table also available.

    As per Is : 199 for concrete

    The Flow Table consists of a brass or Mild steel table top of 76.2 cms(30")dia, finely machine from a solid brass casting or Mild steel Plate. The stand is fabricated out of cast iron/mild steel and is of study construction. The ground and hardened steel cam is designed to drop the table by 12.5mm. Complete with flow mould with handles with one tamping rod 0-60 cms long X 16cm. electrically operated to raise and drop the table top. approx. 15 times in 15 seconds. Suitable for operation on 230 volts, 50 cycles, A.C. Supply. Manually operated flow table also available.

    Request
    Callback
    Yes! I am interested

    Flow Table Motorised

    Flow Table Motorised
    • Flow Table Motorised
    Get Best Quote
    Approx. Price: Rs 19,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Operating ModeAutomatic
    Driven TypeElectric
    Voltage230 V

    shaft is rotated at the rate of 100 RPM by an electric motor. Suitable for operation on 230 volts 50 cycles, single phase, AC Supply.

    The flow table determining the flow of portland coment concrete. Consists of flow table a top 76.2 cms (30") dia, finely machined froma solid brass/gunmetal casting. The stand is fabricated out of cast iron/mild steel and is of study construction. The ground and hardened steel cam is designed to drop the table by 12.5 mm. complete with flow mould with handles with one tamping rod 0-60 cms long X 16 mm dia. Electrically operated to raise and drop the table top. Approx. 15 times in 15 seconds. Suitable for operation on 230 volts, 50 cycles, A.C. Supply.
    Request
    Callback
    Yes! I am interested

    Gauging Trowel

    Gauging Trowel
    • Gauging Trowel
    Get Best Quote
    Approx. Price: Rs 400 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialSS,MI
    Capacity210 gm
    TypeHandheld

    Pointed type with approx. 210 gm weight. Fitted with best quality wooden handle.

    Request
    Callback
    Yes! I am interested

    Heat Of Hydration Apparatus

    Heat Of Hydration Apparatus
    • Heat Of Hydration Apparatus
    Get Best Quote
    Approx. Price: Rs 18,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MI
    Operating ModeAutomatic
    Driven TypeElectric

    This equipment is required to determine the heat of hydration of cement as expressed in calories per gram.

    The Euipment comprises of the following :

    • A wide mounted double walled vacuum flask with a stop cock 38 mm a insulating container for the flask
    • A Beckman thermometer (Range 5° C )held tightly by the cock stopper in such a way as to avoid accidental contact with the stirrer blade the reading lens. To facilitate the easy removal the cock stopper is in two halves.
    • A constant speed stirrer (double bladed propeller type)extended to within 38 mm from the bottom of the flask.
    • A funnel (Gooch type)with a stem of 6 mm inner dia a body approx 25 mm long and 25 mm dia is fitted to the cock stopper for introducing the sample

    All the above to combine to form the calorimeter for the determination of heat of hydration of cement. Suitable To Operate on 230 V A.C. 50 Hz.

    Request
    Callback
    Yes! I am interested

    Humidifier

    Humidifier
    • Humidifier
    Get Best Quote
    Approx. Price: Rs 12,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialStainless Steel
    Capacity3 L
    Operating ModeAutomatic

    Humidifier is based on the rotating disc splash plate principle. Produces super fine particles which become part of the atmosphere, reaching every corner of the room, resulting cool mist, which does not condense when obstructed and remains suspended in the air, thus achieving humidity upto 95 % RH in enclosed areas. This unit is capable of atomizing upto 3 ltr of water in an hour at full evaporation in the driest possible ambient conditions.

    An optional arrangement can also be provided to control the humidity which automatically cuts off and put on the unit as required (at an extra cost)
    Request
    Callback
    Yes! I am interested

    Humidity Oven

    Humidity Oven
    • Humidity Oven
    Get Best Quote
    Approx. Price: Rs 45,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Driven TypeElectric
    Operating ModeAutomatic
    MaterialCI, MI

    • EIE-106, For Curing of Cement Mortar Moulds at 27 deg centigrade and 95% HumidityWith Refrigeration System.
    • Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated.
    • Temperature ranges from 10°C to 60°C controlled by Dual display microprocessor based Digital temperature indicator cum controller with ± 0.5°C accuracy or better.
    • Cooling system consist of high efficiency Kirloskar Make compressor with relevant accessories.
    • Humidity ranges from atmospheric humidity to 95 % controlled by dual display Microprocessor based Digital Temperature Controller (Dry and Wet bulb method) with accuracy +3 % RH or better
    • Inner water tank made of stainless steel with ball cock valve
    • Front door has a full view glass observation window
    • Chamber Size : 70 X 50 X 50 cm., Cubic feet : 6, Trays : 3
    Request
    Callback
    Yes! I am interested

    Le-Chatlier Waterbath

    Le-Chatlier Waterbath
    • Le-Chatlier Waterbath
    Get Best Quote
    Approx. Price: Rs 9,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialStainless Steel
    Voltage230 V
    Driven TypeElectric

    Double walled inner chamber in stainless steel outer chamber in mild steel temperature range Ambient to 100°C controlled by capillary thermostat. Accuracy ± 1°C operated on 230V A.C. Single Phase. These baths are suitable for washing Marshall specimen. Lid is made up of stainless steel with a hole for glass thermometer to penetrate.

    • 12" length x 9" width x 7" height having rating 750W.
    • 18" length x 12" width x 7" height having rating 1500 W.
    Request
    Callback
    Yes! I am interested

    Mortar Mixer

    Mortar Mixer
    • Mortar Mixer
    Get Best Quote
    Approx. Price: Rs 36,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialSS
    Voltage230 V
    Phase3 Phase

    It is used for mixing cement pastes, mortars and pozzolana.

    Specification :

    The apparatus consists of an epicyclical type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 + 5 R.P.M. And 285 +10 R.P.M. With planetary motions of approximately 62 r.p.m, +5 R.P.M. And 125 R.P.M. +/- 10 R.P.M. Respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six liters capacity. Suitable for operation on 230 V, 50 cycles, Single Phase A.C, Supply.

    Request
    Callback
    Yes! I am interested

    Shrinkage Bar Mould

    Shrinkage Bar Mould
    • Shrinkage Bar Mould
    Get Best Quote
    Approx. Price: Rs 2,700 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MI
    Mould size25 x 25 mm
    TypeDouble Gange/ Tripple Gange

    Hand Driven Operated


    ASTM C 151 also specifies the use of shrinkage bar moulds for the determination of soundness. Length Comparator listed in the concrete section determines the change in length of the specimen. Two models are offered. One is provided with stainless steel smooth reference points and the other is provided with knurled and threaded reference points. Both the models are available as single mould and multiple mould compartments. Each mould is supplied complete with base plate and two reference points per compartment of mould. Mould size: 25 x 25 mm section and 250 mm effective length (Distance between two inner-most of the reference points) The models are available in three kinds of apartments i.e. One, Two, Four with smooth and knurled threaded reference points.

    • Shrinkage Bar Mould - Double Gange
    • Shrinkage Bar Mould - Tripple Gange
    • Shrinkage Bar Mould - Four Gange

    Optional Extra:-

    • Set of 20, Smooth Reference Points
    • Set of 20, knurled and threaded reference point
    Request
    Callback
    Yes! I am interested

    Sieve Shaker - Gyratory

    Sieve Shaker - Gyratory
    • Sieve Shaker - Gyratory
    Get Best Quote
    Approx. Price: Rs 18,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Driven TypeElectric
    MaterialCI, MI
    Operating ModeAutomatic

    This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.

    Adaptor for 30cm dia test sieves can be fitted in above.

    For 45CM DIA Sieves:

    This sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply.

    Optional Extra:
    • DIGITAL Time switch 0-99 minutes for above
    • MECHANICAL Time switch 0-60 minutes for above
    Request
    Callback
    Yes! I am interested

    Sieve Shaker - Rotap

    Sieve Shaker - Rotap
    • Sieve Shaker - Rotap
    Get Best Quote
    Approx. Price: Rs 40,500 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Driven TypeElectric
    MaterialCI, MI
    UsageConstruction

    This Shaker reproduces both circular and tapping motion, Produces Circular (280-320 RPM approx) and tapping (140-160 RPM approx) motion with a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. A 1/4 H.P. electric motor runs the machine, the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.

    Optional Extra:
    • DIGITAL Time switch 0-99 minutes for above
    • MECHANICAL Time switch 0-60 minutes for above
    Request
    Callback
    Yes! I am interested

    Sieve Shaker - Table Model

    Sieve Shaker - Table Model
    • Sieve Shaker - Table Model
    Get Best Quote
    Approx. Price: Rs 27,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI
    Digital Time switch 0-99 minutes for above
    Driven TypeElectric

    (Soundless) Vibration type cast iron body. Electrically operated Fitted with FHPElectric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 6 test sieves of 20cm.dai(without test sieve and time switch.) Adaptor for 30 cm dia test sieves .

    Optional Extra:
    • Digital Time switch 0-99 minutes for above
    • Mechanical Time switch 0-60 minutes for above
    Request
    Callback
    Yes! I am interested

    Standard Spatula

    Standard Spatula
    • Standard Spatula
    Get Best Quote
    Approx. Price: Rs 100 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    UsageConstruction
    MaterialSS, MS
    Capacity340 gms

    This is for use while casting a cement briquette.

    Specifications:

    • The standard spatula consists of a steel blade, of a special shape
    • A wooden handle is fixed to the stem of blade
    • The weight does not exceed 340 gms
    Request
    Callback
    Yes! I am interested

    Gauging Trowel

    Gauging Trowel
    • Gauging Trowel
    Get Best Quote
    Approx. Price: Rs 400 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialSS, MS
    TypeHandheld
    FeatureSoft grip handle

    Ideal for working in confined spaces with rounded nose to hold more mortar. Soft grip handle and steel ferrule.
    Request
    Callback
    Yes! I am interested

    Indian Standard Sand

    Indian Standard Sand
    • Indian Standard Sand
    Get Best Quote
    Approx. Price: Rs 1,000 / BagGet Latest Price

    Product Details:

    Minimum Order Quantity1 Bag
    Packaging SizeCustomised
    GradeCrystal Type
    UsageConstruction

    We haridarshan Enterprise is Wholesale Supplier of the Indian Standard Sand.
    Request
    Callback
    Yes! I am interested

    Ennore Sand

    Ennore Sand
    • Ennore Sand
    Get Best Quote
    Approx. Price: Rs 1,500 / BagGet Latest Price

    Product Details:

    Minimum Order Quantity1 Bag
    Packaging TypeCustomised
    GradeFine particles
    UsageConstruction

    We are wholesale Supplier of the Ennor Sand / Indian Standard Sand In Ahmedabad / Gujarat
    Request
    Callback
    Yes! I am interested

    Compaction Factor Apparatus

    Compaction Factor Apparatus
    • Compaction Factor Apparatus
    Get Best Quote
    Approx. Price: Rs 13,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialMS, SS
    Operating ModeManual
    UsageConstruction

    Request
    Callback
    Yes! I am interested

    Cube Mould

    Cube Mould
    • Cube Mould
    Get Best Quote
    Approx. Price: Rs 600 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialMS, SS
    UsageConstruction
    Operating ModeManual

    Request
    Callback
    Yes! I am interested

    Cube Mould

    Cube Mould
    • Cube Mould
    Get Best Quote
    Approx. Price: Rs 1,900 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialMS, CI
    StructureCube
    UsageConcrete Testing

    Request
    Callback
    Yes! I am interested

    Gauging Trowel

    Gauging Trowel
    • Gauging Trowel
    Get Best Quote
    Approx. Price: Rs 400 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialSS, MS
    TypeHandheld
    UsageStonework, Brickwork

    Request
    Callback
    Yes! I am interested

    Grout Pump 140 PSI

    Grout Pump 140 PSI
    • Grout Pump 140 PSI
    Get Best Quote
    Approx. Price: Rs 7,500 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    Power SourceElectric
    Pump TypeCentrifugal Pump
    MaterialCI

    Request
    Callback
    Yes! I am interested

    Cement Testing Equipment

    Cement Testing Equipment
    • Cement Testing Equipment
    Get Best Quote
    Approx. Price: Rs 6,000 / NumberGet Latest Price

    Product Details:

    Minimum Order Quantity1 Number
    MaterialCI, MS
    Operating ModeManual
    UsageConstruction

    Request
    Callback
    Yes! I am interested
    X

    Explore more products



    Reach Us
    Alpesh Patel (Proprietor)
    B-10, Highway Estate, Sarkhej- Sanand Road
    Ahmedabad- 382210, Gujarat, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS